BEP Marine BEP 701 Dual Operation VSS And Emergency Parallel Switch

Uses the same operation as the motor driven battery
switches

The BEP 701 Dual Operation VSS and Emergency Parallel
Switch supports dual battery sensing and remote emergency
parallel function. It can be operated through a momentary button on
the dash which will parallel the batteries for a preset time of 10
minutes. Once this 10 minutes has passed, if the voltage is up high
enough for the voltage sensitive switch to operate, it will stay
engaged. If not, it will disengage. Plus, it features manual
override option using a high current VSR is covers your dual
battery charging requirements and emergency parallel operation in
one unit.

Engine Run Sensing System
This battery switch engages when the voltage on either start or
house battery reaches 13.7 volts. If the combined battery voltage
drops below 13.0 volts and the engine is not running, after 5
seconds the contacts will open and stay open until the start or
house battery voltage exceeds 13.7 volts. If the combined battery
voltage drops below 12.2 volts and the engine is running, after 5
minutes the contacts will open and stay open until the start or
house battery voltage exceeds 13.7 volts. If voltage drops below 13
volts and stays above 12.2 volts on either start or house battery
while engine is running, the VSR will stay engaged.

BEP 701 Dual Operation VSS and Emergency Parallel Switch
Specifications:

• Volts: 12V
• Rating: 275Amps
• Engages: 13.7
• Disengages: 12.2 – 13.00
• Dimensions(mm): 68 x 68 x 101

Optional Accessory:

BEP Marine Remote for Emergency Parallel Switch is
for the remote operation of the 701-MDVS and 720-MDVS voltage
sensitive battery switches. This momentary switch is used to
activate the 10 minute emergency parallel function, a built-in of
the BEP Marine battery switches. It can conveniently be placed
within easy reach of the operator. And, it also features an LED
battery switch status indicator.

BEP Marine Remote for Emergency Parallel Switch
Features:

• Durable construction
• Convenient remote use of the battery switches
• Activates the 10 minute emergency parallel function
• Can be mounted standalone or within the Contour Connect panel
  range
• Measures 2 11/16″ x 2 11/16″
• Works with 12V or 24V systems